Growduino 

is a system based on the Arduino platform, created for a complete remote control and monitoring of closed indoor growing areas such as growrooms and greenhouses...


More info

Sensors

 Light sensor


Light metering. You can have as much as 3pcs of these sensors and you can use them to effectively manage artificial lighting in the greenhouse and get to harvest even outside of usual seasons. You can also use those to detect...

More info

 Temperature and Humidity sensor


Measuring the air temperature and relative humidity. With this sensor, you can measure the temperature and humidity inside the growing area. Based on the measured values you can effectively manage not just ventilation, but also the heating and humidification...

More info

 Water Temperature sensor


Measures temperature of fluids/liquids. This is a waterproof sensor to measure the temperature of watering fluid or nutrient solution (in case of hydroponic setup). It's also possible to use the sensor for standard measuring of...

More info

 Water level sensor


Ultrasound distance measurement. This sensor is used to measure the surface levels of water in water tanks or NFT circulatory or Ebb&Flow system. By using this sensor with outlet valve, you can refill one water tank from another one for example....

More info

 Temperature sensor


Measures basic air temperature. In the Growduino system it's used as a thermostat. With this sensor the lights will turn off when temperature reaches critical point. This sensor is included in every Growduino unit automatically...

More info

 EC sensor


Sensor for measuring electric conductivity in liquids. Shows amount of dissolved nutrients. Based on measured values You will receive email alert when EC is too high or low. Achieving adequate EC values is one of most important things ...

More info



 pH sensor


Sensor for measuring acidity in liquids. Based on measured values You will receive email alert when pH is too high or low. Achieving adequate pH values is one of most important things for every grower's technique like soil, hydroponic or even aquaponic - fish tank...

More info



 CO2 sensor


Sensor for measuring amount of CO2 in air. Based on measured values You can drive electronic valve and dispense CO2 into your grow area. Reach desired level of CO2 is necessary for faster growth and maximizing yield. Dosing CO2 gas tied together with ventilation. You can set...

More info